DIN931 Duplex Alloy 2205 Fastener Hex Bolt With Partial Threaded DIN933

DESCRIPTION

Duplex Alloy 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades. It demonstrates good fatigue strength, as well as outstanding resistance to stress-corrosion cracking, crevice, pitting, erosion and general corrosion in severe environments.

CHEMISTRY TYPICAL

Carbon: 0.30 max
Silicon: 1.0 max
Manganese: 2.00 max
Molybdenum: 2.50 - 3.50
Nickel: 4.50 - 6.50
Chromium: 21.00 - 23.00
Phosphorus: 0.03 max
Sulfur: 0.020 max
Nitrogen: 0.08 - 0.20 I
ron: Balance

PHYSICAL PROPERTIES

Density: 0.285 lbs/in3 7 .88 g/cm3

Thermal Conductivity: BTU-ft/hr/ft2/°F (W/m-° K):
At 68 - 212 °F (20 - 100 °C): 11.0 (19.0)

Mean Coefficient of Thermal Expansion: in/in/°F (µm/m•K):
32 - 212 °F: 7.6 x 10·6 (13.7)

Modulus of Elasticity: ksi (MPa):
27.5 x 103 (190 x 103) in tension

FORMS

Coil - Strip, Foil, Ribbon Wire - Profile, Round, Flat, Square

double ended stud

duplex steel fasteners

DIN931 Duplex Alloy 2205 Fastener Hex Bolt With Partial Threaded DIN933 Images